MisterFixx revised this gist . Go to revision
1 file changed, 31 insertions
radiosonde.log(file created)
| @@ -0,0 +1,31 @@ | |||
| 1 | + | Container started | |
| 2 | + | 2025-08-25 14:02:23,584 INFO:Reading configuration file... | |
| 3 | + | 2025-08-25 14:02:23,586 WARNING:Config - Web Password not set, disabling web control | |
| 4 | + | 2025-08-25 14:02:23,713 WARNING:rtl_sdr test call resulted in return code of 1. | |
| 5 | + | 2025-08-25 14:02:23,797 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/002 | |
| 6 | + | 2025-08-25 14:02:29,239 WARNING:rtl_sdr test call resulted in return code of 1. | |
| 7 | + | 2025-08-25 14:02:29,324 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/002 | |
| 8 | + | 2025-08-25 14:02:34,794 WARNING:rtl_sdr test call resulted in return code of 1. | |
| 9 | + | 2025-08-25 14:02:34,882 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/002 | |
| 10 | + | 2025-08-25 14:02:40,325 WARNING:rtl_sdr test call resulted in return code of 1. | |
| 11 | + | 2025-08-25 14:02:40,404 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/002 | |
| 12 | + | 2025-08-25 14:02:45,874 WARNING:rtl_sdr test call resulted in return code of 1. | |
| 13 | + | 2025-08-25 14:02:45,970 INFO:RTLSDR - Attempting to reset: /dev/bus/usb/001/002 | |
| 14 | + | 2025-08-25 14:02:51,396 ERROR:RTLSDR - RTLSDR with serial #00000001 was not recovered after 5 reset attempts. | |
| 15 | + | 2025-08-25 14:02:51,396 ERROR:RTLSDR #00000001 non-functional. | |
| 16 | + | 2025-08-25 14:02:51,396 WARNING:Config - RTLSDR #00000001 invalid. | |
| 17 | + | 2025-08-25 14:02:51,397 ERROR:Config - No working SDRs! Cannot run... | |
| 18 | + | Traceback (most recent call last): | |
| 19 | + | File "/opt/auto_rx/auto_rx.py", line 1102, in <module> | |
| 20 | + | main() | |
| 21 | + | File "/opt/auto_rx/auto_rx.py", line 838, in main | |
| 22 | + | _temp_cfg = read_auto_rx_config(args.config) | |
| 23 | + | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | |
| 24 | + | File "/opt/auto_rx/autorx/config.py", line 928, in read_auto_rx_config | |
| 25 | + | raise e | |
| 26 | + | File "/opt/auto_rx/autorx/config.py", line 908, in read_auto_rx_config | |
| 27 | + | raise SystemError("No working SDRs!") | |
| 28 | + | SystemError: No working SDRs! | |
| 29 | + | 2025-08-25 14:02:51,400 INFO:Starting shutdown of all threads. | |
| 30 | + | Main Loop Error - No working SDRs! | |
| 31 | + | Container stopped | |
Newer
Older